Keeping Your Battery Clean Can Make Your Car Safe



Have you ever tried to jump start your car battery and was surprised that it was covered in gunk? That nasty gunk is battery oxidation thats formed by acid condensation. You can easily clean this by using a simple chemical solution. Something as simple as baking soda could easily clean the battery acid. You need to take some precautions, but safe cleaning of your battery is simply following a few instructions.

The very first thing you'll want to do is to find the necessary supplies, which you may already have at home. The essential tools you'll need are a pair of safety glasses to shield your eyes, adjustable pliers and a screwdriver with insulated handles, a stiff bristled brush, and the key component, baking soda. Some other items you need requires a metal or plastic scraper, box or open-end wrenches, cleaning brushes for the battery terminal, and either a turkey baster or small funnel. It is also important to have a bucket of water,rubber gloves, spray-on household cleaner and some sponges or clean cloths. All of this will guarantee a safe cleaning of this battery.

A few of the corrosive deposits possess sulfuric acid, so it is a wise idea you can look here to use the safety glasses to protect your eyes, and the rubber gloves for your hands. You'll want to continue to keep this compound away from your car, since it can eat away the paint. Contingent on how corroded the battery is, the amount of cleaning that is needed will be different. If you want the battery to get very clean, you will have to remove the battery from the vehicle. For this primary cleaning, you use the scraper and the bristle brush to remove as much of the dirt and corrosion as you can.

Next step will be to mix one tablespoon of baking soda with a pint of water and add the solution to the battery and the cable connection using the funnel or turkey baster. Afterward you use the brush to remove the surplus deposits plus be sure to disconnect the cables for easier cleaning. Make use of the pliers or maybe assorted wrenches to loosen the connectivity before pulling them off, starting with the negative first, and then the positive. For other elements of the battery, use the brush to remove the deposits then purge with the baking soda solution.

So now apply the liquid cleaner in the spray bottle, and a sponge to get rid of the remaining dirt and grease. Dry everything off with a fresh cloth and then reassemble everything the way you took it apart, reconnecting the positive first. Finally, make certain that everything is anchored and now you have a clean and safe battery.

Leave a Reply

Your email address will not be published. Required fields are marked *